Wetlook Shiner – Dakshampoo®
Dakshampoo® Wetlook Shiner is an innovative, 1-component solvent-free coating for protecting (natural) stone surfaces. It is a product that renews, restores and protects. It works quickly, is easy to use and gives a long-lasting effect. The product is intended for porous and non-porous surfaces such as: ''plastic, paint, glass, metal, concrete, stone and leather.''
Photos voorbeelden van resultado
Erwin van Dooren
Verified owner
Works fine, but I expected it to be a bit more powerful
3 months ago
Erwin van Dooren
Verified owner
Works excellent, but it is important to apply a (super)thin layer to troweled concrete.
3 months ago
Erwin van Dooren
Verified owner
Pieter Sombroek
Verified owner
Still have to do it, but you won't know for sure if it's effective for a few years. For now, a 5-star rating.
3 months ago
Pieter Sombroek
Verified owner
The advantages from the Wetlook Shiner
✓ Transforms your roof, facade or terrace
✓ Immediately visible results
✓ Impregnates and deepens the colour
✓ Easy to apply
✓ In use for professional services
Applications
Dakshampoo® Wetlook Shiner can be applied to various mineral surfaces such as paints, plastics, glass, natural stone, marble, terracotta, granite, limestone, concrete and brick. Dakshampoo® Wetlook Shiner can be applied indoors and outdoors.
Content
5 liter
Let op
This product [Wetlook Shiner] is intended for professional use. New users should read the instructions thoroughly before use.
Product sheet
DAKSHAMPOO® Wetlook Shiner improves the natural appearance of the substrate, deepens the colours and adds shine. DAKSHAMPOO® Wetlook Shiner makes the substrate water, dirt and grease repellent, making it very easy to clean. DAKSHAMPOO® Wetlook Shiner can be applied to both floors and walls and retains the natural feel of the substrate. Depending on the application method, a glossy or matt finish can be obtained. DAKSHAMPOO® Wetlook Shiner is vapour-permeable to prevent cracking, blistering and detachment.
Application
DAKSHAMPOO® Wetlook Shiner can be applied to various mineral surfaces such as natural stone, marble, terracotta, granite, limestone, concrete and brick. DAKSHAMPOO® Wetlook Shiner can be used indoors and outdoors.
Properties
• Color deepening
• Glossy or matte finish possible with the same product
• Gives the surface easy-to-clean properties
• Protects the surface
• UV resistant
• Vapour permeable to prevent cracking, blistering and detachment
• Simple application
Specifications
Color: Colorless to light yellow liquid
Smell: Odorless
Specific gravity: 1,0 kg/liter pH: Not applicable Flash point: 40 °C
Application conditions
Ambient temperature: minimum 10 °C Substrate temperature: minimum 10 °C Relative humidity: maximum 85% Protect the coating from rain for at least 16 hours after application.
User
Make the surface clean, dry and dust-free.
Apply a thin layer of DAKSHAMPOO® Wetlook Shiner to the surface with a roller, microfibre cloth or flat mop.
Allow DAKSHAMPOO® Wetlook Shiner to react with the surface for 15 minutes and then remove the excess material with a clean microfibre cloth or flat mop.
Apply a second coat after 24 hours for improved durability. Follow the same procedure.
Drying
Drying: 10 minutes to 24 hours depending on ambient temperature and layer thickness
Theoretical consumption
- 20-100 m²/l depending on the absorption of the substrate
- 5 m²/l on porous roof tiles (two layers)
- 10-15 m²/l on masonry exterior walls (one layer)
Practical information
• Do not dilute or mix with other products.
• Do not exceed the recommended consumption and apply several very thin layers for best results.
• Remove spilled liquids or food residues as soon as possible to prevent stains.
• Surfaces treated with DAKSHAMPOO® Wetlook Shiner can be cleaned after complete curing using a neutral (floor) cleaner. Prolonged contact with a strong alkaline or solvent-based cleaner can damage the coating.
• Cracks, scratches or other damage can easily be repaired by cleaning the surface and removing any dust and then applying a new layer of DAKSHAMPOO® Wetlook Shiner. This can also be done locally.
• In places with intensive (foot) traffic, the coating will wear out faster and will need to be repaired sooner as described above.
Storage and shelf life
Shelf life: at least 12 months in original unopened packaging. Store in a cool, frost-free place.
Safety regulations
Also avoid eye and skin contact. Wear suitable gloves and safety glasses. When in doubt, always consult the safety data sheet or our R&D department.
Technical Support
At DAKSHAMPOO we believe it is important that you are helped as best as possible. That is why our technical advisors are always ready to help you. They can advise you on the best solutions and explain how to use a product. Do not hesitate and contact one of our advisors directly! DAKSHAMPOO, Grote Voort 293A, 8041BL Zwolle T. +31 38 33 77 555 E. info@dakshampoo-shop.nl W. www.dakshampoo-shop.nl
Disclaimer
This product information sheet is intended as a manual for the use of the product and has been drawn up on the basis of the latest developments and technology. Because application, processing and conditions of use are beyond our control, no rights can be derived from this product information sheet. DAKSHAMPOO expressly rejects all liability regarding guarantee and incorrect application and any damage and consequential damage. The user remains responsible at all times regarding application, product choice, application and result.
Brand
ROOF SHAMPOO®
Please note! With the information on this page we want to advise you. All information corresponds to the latest state of the art, but due to the large number of possible applications and the different surfaces we cannot guarantee the results achieved during processing. With the publication of this leaflet all older leaflets of this product are no longer valid. Published: 11-03-2023
FAQ
What should I pay attention to?
Read answer »
Answer:
During drying, the material must be protected from moisture. In contact with moisture, excess material that is not yet dry can crystallize. On dense substrates, excess material can remain wet for a few days. On porous materials, the drying time is approximately 3 hours.
How to prevent?
- Recommended application up to 70% humidity (40-60% is ideal)
- Recommended application up to 28°C (15-22°C is ideal)
- Excess material may crystallize when exposed to moisture during drying
- Apply as little material as possible to dense surfaces or polish completely with a dry cloth
How to remove?
- Isopropanol 99% is best, or as an alternative, bio-ethanol 95-97%
- With soft nylon brush
- Test on a small, inconspicuous area first.
- Moisten the brush with isopropanol (do not pour directly onto the roof!).
- Scrub gently in circular motions (no hard pressure).
- Rinse immediately with water to remove alcohol residue.
More tips:
- Let the surface dry very well first <5%
- Pressure: 1,5–2 bar (fine mist, no drops)
- Distance: 30–50 cm from the roof
- Horizontal passes (50% overlap between lanes)
- Do not spray “wet” – surface should appear moderately damp (no drip marks)
- Ideal: 15–25°C, no wind, cloudy (no direct sun)
- Stop in rain or <10°C / >30°C
- 3-48 hours drying time (protected from rain) depending on the substrate and layer thickness
- Spray on 1–2 pans and check for rash after 72 hours
- There is less accumulation of material on roof tiles because they slope downwards
How long does the wet effect last on roof tiles, terraces and masonry?
Read answer »
Key factors for sustainability:
The “wet look” effect of the Wetlook Shiner lasts on average 5 to 10 years, depending on:
- UV, rain, frost
- Roof pitch, the steeper, the faster the wear
- Porous tiles last longer > Old clay tiles > concrete tiles
- Correctly applied = longer effect > 2 thin layers > 1 thick layer
- Cleaning extends lifespan > Rinse annually
The advice is to take into account that the treatment of roof tiles should be repeated after approximately 10 years. Over the years, the wet effect will degrade. The degradation process depends on the layer thickness and external influences. The product can be applied quite easily to create the wet effect again. Now that is easy on a facade because the facade is usually still clean enough, but with roof tiles and terraces, this usually has to be sprayed off with a high-pressure cleaner first, but since the impregnation effect is still active, cleaning will be much easier.
How long does the impregnation effect last?
Read answer »
The advice is to take into account that the treatment should be repeated after 15 years to reactivate the impregnation effect. During the 15 years the impregnation effect will degrade. The degradation process depends on the layer thickness and external influences.
How can I treat my car with this?
Read answer »
The car must be thoroughly clean so that no other agents are present in the surface. The surface must be able to absorb the Wetlook Shiner well and not be applied over another agent such as wax. Use 3 microfiber cloths. A small cloth for applying the agent. A second clean larger cloth for removing the excess material and a third clean cloth for removing the last bit of material. Do not apply the material in the hot sun. Apply per element and let it work for a short time. Do not let it work for too long as the material becomes increasingly viscous and it becomes more difficult to polish or remove the excess material.
How long do the effects last on cars?
Read answer »
The effects remain visible for between 1-5 years depending on the method of application and the degree of friction caused by the washing method (laundry or manual) and whether the car is stored indoors or outdoors.
What other products can you recommend?
Consumption
Roofing:
- Baked roof tiles 10 m2 / liter (1 layer)
- Concrete roof tiles (partly worn) 5 m2 / liter (2 layers)
- Concrete roof tiles (completely worn) roof tiles 5 m2 / liter (2 layers)
Facades:
- Brickwork 10 m2 / liter (1 layer)
Others:
- Non-porous surfaces: up to 110 m² / liter
Depending on the application method: Airless spraying, compressed air spraying, roller, brush, etc.
User
General
1. Make the surface clean, dry and dust-free.
2. Apply a thin layer of Dakshampoo® Wetlook Shiner to the surface using a sprayer, roller, microfibre cloth or flat mop.
3. Allow the Dakshampoo® Wetlook Shiner to react with the surface for 15 minutes and then remove the excess material with a clean microfibre cloth or flat mop.
4. Apply a second coat after 24 hours for improved durability. Follow the same procedure.
Instructions for use of porous roof tiles
1. Make the surface clean, dry and dust-free.
2. Apply a thin layer of Dakshampoo® Wetlook Shiner to the surface using an airless sprayer, paint sprayer, pressure pump, roller, or brush. Choose the most economical application to avoid waste.
4. After 24 hours, apply a second coat for increased durability and saturation to achieve a wet effect.
Instructions for use exterior walls
1. Make the surface clean, dry and dust-free.
2. Apply a thin layer of Dakshampoo® Wetlook Shiner to the surface with a sprayer, roller or brush.
4. After 24 hours, apply a second coat for increased durability and saturation to achieve a wet effect.
Other application conditions
- Make the surface clean, dry and dust-free.
- Apply a thin layer of Dakshampoo® Wetlook Shiner to the surface with a roller, microfibre cloth or flat mop.
- Allow the Dakshampoo® Wetlook Shiner to react with the surface for 15 minutes and then remove the excess material with a clean microfibre cloth or flat mop.
- Apply a second coat after 24 hours for improved durability. Follow the same procedure.
![Wetlook Shiner [impregnation coating] water-repellent, dirt and algae repellent – [water-repellent for up to 15 years] – transparent, colour-enhancing, wet effect, gloss or matte – for roofs, facades, terraces, varnishes, plastics etc. – for porous and non-porous materials - Figure 2](https://www.dakshampoo-shop.nl/wp-content/uploads/2023/03/Wetlook-shiner-foto-na-wetlook-shiner-behandeling-010.jpg)
![Wetlook Shiner [impregnation coating] water-repellent, dirt and algae repellent – [water-repellent for up to 15 years] – transparent, colour-enhancing, wet effect, gloss or matte – for roofs, facades, terraces, varnishes, plastics etc. – for porous and non-porous materials - Figure 3](https://www.dakshampoo-shop.nl/wp-content/uploads/2023/03/Wetlook-shiner-behandeld-en-onbehandeld-002.jpg)
![Wetlook Shiner [impregnation coating] water-repellent, dirt and algae repellent – [water-repellent for up to 15 years] – transparent, colour-enhancing, wet effect, gloss or matte – for roofs, facades, terraces, varnishes, plastics etc. – for porous and non-porous materials - Figure 4](https://www.dakshampoo-shop.nl/wp-content/uploads/2023/03/Wetlook-shiner-foto-na-wetlook-shiner-behandeling-009.jpg)
![Wetlook Shiner [impregnation coating] water-repellent, dirt and algae repellent – [water-repellent for up to 15 years] – transparent, colour-enhancing, wet effect, gloss or matte – for roofs, facades, terraces, varnishes, plastics etc. – for porous and non-porous materials - Figure 7](https://www.dakshampoo-shop.nl/wp-content/uploads/2026/03/dakpannen-impregneren-wetlook-shiner_2_1.2.1.jpg)
![Wetlook Shiner [impregnation coating] water-repellent, dirt and algae repellent – [water-repellent for up to 15 years] – transparent, colour-enhancing, wet effect, gloss or matte – for roofs, facades, terraces, varnishes, plastics etc. – for porous and non-porous materials - Figure 9](https://www.dakshampoo-shop.nl/wp-content/uploads/2023/03/wetlook-shiner-impregneer-coating-dakshampoo-volle-pallet.jpg)
Verified rating - view original
